100TPD RBD Oil Solvent Extraction Machinery

Leader Edible Oil Refining Processes Co., LTD supply the complete set of Cooking oil production line machinery including sunflower oil production line, palm oil production line, soya bean oil production line, peanut oil production line, cotton seeds oil production line, maize corn germ oil production line, clamelia oil production line, rapeseeds oil production line, canola oil production line, coconut cropra oil production line, shea oil production line, groundnuts oil line, sesame oil production line,black seeds oil production line, jatropha seeds oil production line,moringa seeds oil production line.

Welcome Contact us any time!

Contact:Heidi

Skype:heyabc

Tel:+86 15953125015(also Whatsapp)

Email:[email protected]

Leader Edible Oil Refining Processes Co., LTD is your LD choice!

The cages with sterilised fruit bunches are emptied into a bunch hopper that feeds the thresher (bunch stripper) where the fruits are separated from the bunches. Thereafter the loose fruits are conveyed to a digester and then to a screw press. At the press, the palm oil is pressed out of the fruits. The oil goes to the de-sanding and decanting tanks, while cake, also containing the palm nuts, is conveyed to the palm kernel recovery station.

When the oil leaves the screw press it contains water, sand and impurities. During a process of static de-sanding and decanting, most of the impurities in the oil are removed in a centrifugal oil purifier. The last traces of oil in the effluent are recovered in a centrifugal sludge separator

Specifications

RBD Oil Solvent extraction Machinery
1.High oil quality equals to EU standard;
2.Stainless,carbonless steel;
3.Engineer errec

100TPD RBD Oil Solvent extraction Machinery

1.Technological process introduction

Material embryos→Extraction→Wet meal→Evaporation→Cooling→Product meal packing

↓

Mixed oil→Filter→Negative pressure evaporation → Crude oil

↓

Solvent recovery

Solvent extraction Machinery" ori-width="600" ori-heigld="600">

2.Main economic and technical parameters

Residual oil in meal	≤1% (soybean)
Solvent consumption	≤3Kg/T(6#solvent oil)
Crude oil moisture and volatile matter	≤ 0.30%
Power consumption	≤ 15KWh/T
Steam consumption	≤280Kg/T (0.8MPa)
Finished meal moisture	≤ 10-13% (adjustable)
Residual solvent in finished meal	≤ 300PPM (qualified detonated experiment)

Solvent extraction Machinery" data-width="594" data-heigld="377" ori-width="360" ori-heigld="360">

3. Introduction

(1) Function: Leaching system is an oil extraction through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.

(2) Use range: Solvent extraction fits for pre-press extraction of high-oil-content materials and direct once time extraction of low-oil-content materials.

(3) Main parts: The extraction series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.

Solvent extraction Machinery" data-width="600" data-heigld="463" ori-width="600" ori-heigld="600">

4. Main Process

(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.

(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.

(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.

(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.

Solvent extraction Machinery" data-width="615" data-heigld="422" ori-width="656" ori-heigld="367">