high oil extraction rate palm oil refinery with good quality

leader edible oil refining processes co., ltd supply the complete set of cooking oil production line machinery including sunflower oil production line, palm oil production line, soya bean oil production line, peanut oil production line, cotton seeds oil production line, maize corn germ oil production line, clamelia oil production line, rapeseeds oil production line, canola oil production line, coconut cropra oil production line, shea oil production line, groundnuts oil line, sesame oil production line,black seeds oil production line, jatropha seeds oil production line,moringa seeds oil production line.

Welcome Contact us any time!

Contact:Heidi

Skype:heyabc

Tel:+86 15953125015(also Whatsapp)

Email:[email protected]

leader edible oil refining processes co., ltd is your LD choice!

Deacidification of palm oil refining machine :This part adopt alkali refining method, that is use alkalis lLD (NaOH) to neutral the free fatty acid in oil, during this process it will produce soapstock , then separated from the oil by setting several hours. NAOH solution, not only neutral free fatty acid, also can act with other matters lLD protein, mucus, phospholipid, pigment. After settling, release the soapstock from the tank bottom. Adding hot water to rinse, remove off the leftover lye , soap and some unhydrated phospholipid in the oil. Finally pumping out soapstock from the tank bottom.

Deodorization and Dehydration of palm oil refining machine :Usually ,there are some odors in the crude oil , it affects the quality of the edible oil . About our refining process , we usually use the direct steam to take odors away in the vacuum condition . General speaking there is about 0.5% water in the alkali refined oil, in the deodorization pot, thetemperature is very high , it also can finish the dehydration section.

High oil extraction rate palm oil refinery with good quality

Palm oil refinery Process Flow Chart

EFB(Empty Fruit Bunch)

↑

FFB(Fresh Fruit Bunch)→Loading →Sterilizing →Threshing →Press →Oil Clarify →CPO

↓

Fiber Separation →Fiber
↓

Kernel Recovery →Shell
↓

Palm Kernel

↓

Press →Kernel cake

↓

PKO(Palm Kernel Oil)

Parameter of Palm oil refinery

Main Parts of Palm oil refinery

Reception Station of Palm oil refinery

Fresh Fruit Bunch (FFB) is transported by trucks, and get into the palm oil factory through the weigLDbridge to weigLD the raw materials to calculate the production cost. Palm bunch reception process is finished at loading ramp. This loading ramp makes palm fruit unloading,cleaning, storage platforLD, adopting all hydraulic segmented discharge.

Sterilizer Station of Palm oil refinery

Fresh Fruit Bunch(FFB) is conveyed to horizontal sterilizer or vertical sterilizer, and 3 bar saturated steam is pumped into sterilizer for sterilization purpose, making the fruit soft and increasing its moisture. The sterilization process need to be 90-120 mins in order to make fruit and empty bunch separated easily, also make oil extraction easily.

Thresher Station of Palm oil refinery

After the sterilization, the palm fruit is transported into thresher by elevator conveyor, palm fruit and empty bunch are separated by viberating process, after this, palm fruit is conveyed into cooking pot, and empty bunch can be usd as fuel or fertilizer.

Clarification Station of Palm oil refinery

The crude palm oil (CPO) after pressing has water and impurities, so we need to clarify CPO to dirty oil and clean oil, clean oil will be transported in crude oil storage tank, while dirty oil will be recovered by centrifuge.

Do you want more informtaion about Plam Oil Press Machine?

Please contact me without hesitation!!!