1T/D-100T/D oil refining equipment small crude oil refinery soybean oil refinery plant vegetable oil refining

The vegetable oil sunflower oil refined soybean oil filling machine is suitable for filling edible oil,olive oil,motor oil,lubricant,gear oil,engine oil,all kinds of flowing liquid and so on.the vegetable oil sunflower oil refined soybean oil filling machine can fill different shapes of bottle such as round,flat,square,etc.
For Increasing demand of improving oil quality from the oil shop, leader edible oil refining processes co., ltd has developed this mini vegetable oil machine refinery, it can realise the Degumming,deacidification,decolorization,Dehydration, oil after refining plant can reach National Level 2 standard, it has be welcomed by clients all over the world.

1T/D-100T/D oil refining equipment small crude oil refinery soybean oil refinery plant vegetable oil refining

edible oil refinery plant vegetable oil refinery vegetable oil refining

The crude vegetable oil from above mentioned two ways of extracting, oil pressing and/or solvent extraction, will be pumped into oil refinery unit to produce cooking oil at various grades. The main equipment of oil refinery is various kinds of pot and tanks carrying on different tasks with additives. These tasks may include sedimentation/filtering, neutralization (removing free fatty acid), degumming, decolorization (bleaching), deodorization, dewax etc. Different combination of steps and the treating degree of each step result in different grade cooking oil and salad oil.

vegetable oil refinery vegetable oil refining

Neutralizing process for vegetable oil refining

There are 2 methods according to adding different quantity alikali and different oil temperature.

One is weak alkali(10-16 Be) and high oil temperature (75 degrees), who is only used for weak colour and low acidity; The other is low temperature(20 degrees orso ) and density alkali(20 Be orso), whose is used more.

Low temperature(20 degrees or so ) and density alkali(20 Be or so)
Adjust the tempetature of oil to 20-30degrees, then put alkali water of 20-30 Be into oil within 5-10 mins, mixing and rise temperate for 20- 60 mins. When the temperature of oil rise to 60 degrees orso, to stop adding heats and immobility for 6-8 hrs to out of the soap particle.
Weak alkali(10-16 Be) and high oil temperature (75 degrees) (Omission)
Washing by water for vegetable oil refining

After be out of the soap paticle from the under of refiner, then continustly adding the heats to 90degrees, then add some hot water to washing the oil, note the temperature of water is higher for 5-10degrees than oil temperature. Then mixing them for 5 mins, then immobility for 4 hrs, put off the soap water, so for 2-3 times which is confirmed as the oil quality.

Oil washed is added heat to 105 degrees orso, to mix then dehydrate for 1 hour, also directly is pumped into decolorizer vessel for dry for 30 mins in the vacuum condition.

Decolorizer process for vegetable oil refining

Pump the oil netralized into decolorizer vessel, samely mixing to rise its temperature to 90 degrees, then mixing for 30 mins, to reduce water to 0.1%, then put a little clay (decoloring media) 2-4 % of total oil, mixing for 30 mins, to reduce the temperature to 70 degrees, then filte the clay with oil filter, to get the oil decolorized.

Deodorizer process for vegetable oil refining

Pump the oil decolorized into deodorizer vessel in 755mmHg of vacuum, 240 degrees -260degrees, to distillate for 4hrs wit steaLD. Then turn off the steaLD to open the cooler to reduce the temperature to 40-80 degrees, and then check a little oil, if ok to pack it.

De-waxing/winterization process for vegetable oil refining

The standard Bleached Oil enters into the Crystallizing Tanks after heat exchange and cooling. The oil crystallizes and the crystal grows at design temperature. Crystallization speed should be slow and even and the oil should be agitated at the same time. The crystallized oil is sent to the Filter by screw pump to remove wax. Wax is sent to the Wax Tank and then sent to the Wax Storage Tank. Adopt Refrigerating Machine for refrigeration.

This technoloLD adopts mechanical method to dewaxing from the sunflower oil. It is easily operating and the technoloLD is mastered easily, small occupy area, also its cost is lower.

It the raw material is plam oil, it is better if you choose fracnation process equipment to match with oil refining.

Oil Filling machine&capping machine

Equipment process workshop

BSET SERVICE FOR CUSTOMERS:

1. Small trial order are acceptable for you to check our quality and service;

2. Bigger order with bigger discount;

3. Professional guidance are available all the time;

4. We can also help you to do ENGENEERING TEST in our own laboratory.

5. Professional technicians and skilled workers can promise you the top quality of world class;

6. Highly inspecting equipments in every working procedure, quality comes first;

7. Fast & Safe delivery .

Welcome to our factory in Shandong Leader, LD province, China to have a visit.

leader edible oil refining processes co., ltd believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the LD possible manner on a long term and mutually beneficial basis. If you want to know more information about our sunflower oil plant or any other seed processing plant, please contact us in the following form. Our responsible, experienced sunflower oil processing technical team is always ready to serve and guide you at any time.

All the other oil seeds pre-treatment and oil refining equipment, lLD sheller, cleaning sieve, cooker, filter and others is available at Guangxin. If you want to know to start a vegetable oil pressing line with oil press machine, please contact us, we will offer you the LD plan.

Contact:Heidi

Skype:heyabc

Tel:+86 15953125015(also Whatsapp)

Email:[email protected]

leader edible oil refining processes co., ltd is your LD choice!