High quality blackseed oil cold pressed machine price

The cages with sterilised fruit bunches are emptied into a bunch hopper that feeds the thresher (bunch stripper) where the fruits are separated from the bunches. Thereafter the loose fruits are conveyed to a digester and then to a screw press. At the press, the palm oil is pressed out of the fruits. The oil goes to the de-sanding and decanting tanks, while cake, also containing the palm nuts, is conveyed to the palm kernel recovery station.

High quality blackseed oil cold pressed machine price

15%~20% of sesame is shell. The rest is kernel. Its oil content is 50%. Sesame oil tastes good. You do not have to refine it. It can be used as cooking oil. Its processing technoloLD is hydration or screw press. We provide all machines necessary for a complete sesame oil plant, including pre-treatment machines, hydration machines, screw press, hydraulic press, etc.

I. Sesame seed pretreatment

Before extracting oils and fats from sesame seeds, the mill needs to prepare it by cleaning, crushing, softening, flaking and cooking. For cleaning, we offer magnetic separator, aspirator or different size cleaning sieves, as shown below, to remove impurities from coconut.

Then, the temperature and moisture of sesame pieces will be adjusted by conditioner or softening kettle so that they become soft and wet enough for flaking. This step improves their ductility. Below is photo of softening kettle.

The flaking roll will make the wet soft sesame pieces into flakes. We have vertical flaking roll, multi-stage flaking roll, hydraulic flaking roll and spring flaking roll etc., as shown below.

Finally, the flakes will be cooked to make tiny oils and fats groups get together to become bigger, and to make them less adhesive, easier to get out of flakes.

II. Sesame oil press

The flakes will be pressed by continuous screw press firstly. After pressing, they fall into two parts: pressed oil and pressed cakes. The oils and fats in pressed cakes will be further extracted by solvent.

Main engine of mustard press machine

Main engine includes base, uprigLD, top plate, oil drip pan nut and so on , it is one of the main parts. Firstly the oil material is put into the assembly of the press boring, then it is drove up by the oil cLDinder piston. Oil will flow out from the gap of press boring, and then pass the oil drip pan to the drum for storage.

Hydraulic system of sesame seed press machine

Hydraulic system is the main power force of this machine, it includes transmission shaft, turbine, worm gear, gear pump, high pressure pump, overflow valve; super high pressure safety valve; hand-operated valve; seamless steel tube; pipeline connect and other spart parts. This machine adopts the advanced power pack of the word, and compared with two plunger pump. It is faster , higher pressure and can resist higher temperature. It can keep working when the oil is above 65 degree, but cooling unit is nessary.

Electronic system of sesame press machine

Electronic system is the most advanced part of this machine, it is fully automatic, easy to operate. There’s no special request to the operator, so this machine is particularly suitable for peasant. It is composed of motor, volt meter, pressure gauge, power insurance and so on.

Main Technical Parameters

Sesame seed oil press machine features

1. High oil yielding, low oil residual in the cake:The oil left in cake is less than 6%. The cake thickness can be adjusted once the machine stops running;

2. Compact size: only 10-20m2 is enough.

3. High purity: machine surface is made of chrome plated stainless steel, in line with food hygiene standards.

4. Easy operation. You should operate as per the instruction.

5. Components:Screw pressing part, Electrical controlling system, automatic heater, adjusting mechanism, driving unit and vacuum oil filter etc.

6.Convenient and safe: concise structure, small occupation area, it use the fully enclosed protection,convenient and safe operation.

Whole set of equipment for palm oil production line.

Motor and power control system.

Installation material.

Installation and test-run.

Drawing of process description, equipment layout, foundation and construction.

Drawing of power control.

Isolation and painting of equipment.

Water recycling and cooling system outside the plant (i.e. supplementary device).

Staff training and long-term technical service.

Main business field

10-500t/h oil material primary cleaning,drying and storage section turn-key project.

100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.

100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,

DTDC separated machine, the full negative pressure evaporation,

Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).

30-1000T/D continuous physical (chemical) refining line.

20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.

10-200T/D fatty acid esterification edible oil production line.

leader edible oil refining processes co., ltd supply the complete set of cooking oil production line machinery including sunflower oil production line, palm oil production line, soya bean oil production line, peanut oil production line, cotton seeds oil production line, maize corn germ oil production line, clamelia oil production line, rapeseeds oil production line, canola oil production line, coconut cropra oil production line, shea oil production line, groundnuts oil line, sesame oil production line,black seeds oil production line, jatropha seeds oil production line,moringa seeds oil production line.

Welcome Contact us any time!

Contact:Heidi

Skype:heyabc

Tel:+86 15953125015(also Whatsapp)

Email:[email protected]

leader edible oil refining processes co., ltd is your LD choice!