Full-continuous process cottonseed oil refining plant,cottonseed oil refinery machine workshop,oil refining plant equipment

1.Screening:Removing the chaff and broken rice in the rice bran, in case of they will influence the oil yield and the desolvent of wet meal in the next process. In the process of puffing section, the general requirement of impurity is less than 3%, and the requirement of crude fiber is about 8%.

2.Magnetic separation :Clearing the iron impurity which migLD be in the rice brain. Since in the process of puffing, the iron impurity will be harmful to the screw of extrusion machine, affect the puffing effect. As the rice brain particles are small and poor liquidity, the iron impurities are always be wiped off by the magnetic barrels installed in the feeding port.

3.Quenching and tempering :it is the process of preheating so that to improve the temperature of the rice bran before puffing. After quenching and tempering the temperature will be controlled at 65--75 °C, and the moisture will be controlled at 10 ~12%. Thus, on the one side, it can increase the output of the extrusion machine, and on the other side, it can improve the quality of the puffed rice bran.

4.Puffing: the rice bran is injecting high pressure steam and high temperature water through the extrusion machine, so that it can improve the temperature and moisture in the extrusion machine,and can also form the high pressure to process the rice bran. All these can make the the rice bran become porous columnar structure from the original pulverized state.All these effectively passivate the activity of various of enzyme in the rice bran, and destroy the fat layer structure, so that it will be easier for the oil yield.

5.Drying:The moisture of puffed material comes from the extrusion machine is too big and the temperature is too high for direct leaching, the must be experience to process of drying and coo-ling, thus the moisture will reach 7%--9%, and temperature will reach 50-55°C. After puffing, the rice brain are usually dried and cooled by plat dryer.

Full-continuous process cottonseed oil refining plant,cottonseed oil

refinery machine workshop,oil refining plant equipment

Part-1: Process Description of Full-continuous process cottonseed oil refining plant,cottonseed oil refinery machine workshop,oil refining plant equipment

Crude sunflower oil refining equipment is suitable for degumming, de-acidifying, decoloring and deodorization treatment.

a. According to the client, the products come up to the high grade cooking oil. The first and the second class of the state standard of China.

b. Main machines:Lye tank, hot water tank, water ejector, water and steam ejector, steam heater, soap stock vessel, refining tank, decolorzing tank, deodorizing vessel, oil separating tank, clay tank, filter, alkal dissolving tank, decolorizing oil tank, oil pump, etc.

c. Flow chart:Crude oil--Neutralize--Degumming--Decoloring--Dedolorizing--Cooling--Winterization--Final oil

d. Process:Physical refining, chemical refining

e. Refining ways:Batch type, semi-continuous, full-reining

f. Raw material:Peanut oil, soybean oil, sunflower oil, rapeseed oil, cottonseed oil, maize oil, rice bran oil, tea seed oil, sesame oil, castor oil, sesame oil, tung oil, walnut oil, etc.

g. Product oil grade:First, second class of national standard.

Part-2: Main Flow Chart of Full-continuous process cottonseed oil refining plant,cottonseed oil refinery machine workshop,oil refining plant equipment

a. Pump the estimated crude oil into the tank and stir it uniformly. Then we take the sample to check the acid value.

b. We should put the estimated lye into the crude oil while we must stir it quickly. The time for putting the lye is 5 to 10 minutes, we keep on stirring it for 30 minutes after the lye is in the crude oil.

c. Static settlement

d. Washing:After the static settlement, we let the soap leavings go from the tank bottom, then we adjust the oil temperature to 70 to 75C. In order to remove the residual lye and soap. The hot water is 10 to 15% of the oil.

e. Drying:We must dry the oil because it has 0.5% more or less water in the oil.

f. Filter:We filter the oil after the temperature is lower 70C nu dewaxing and cooling.

g. Main parts:De-mixed, degumming, dehydration, deacidification, decolorization,dewaxing, deodorization and crystallizaion.

Part-3: Business Area of Full-continuous process cottonseed oil refining plant,cottonseed oil refinery machine workshop,oil refining plant equipment

Refining crude oil: Coconut oil, soybean oil, mustard oil, cottonseed oil, peanut oil, rice bran oil, etc.

Our factory mainly produce oil refining machine, oil Solvent extraction machine, oil fractionation machine, etc. Any questions about the machine please contact Bruce!

Bruce is waiting for u.Just Bruce!

Leader Edible Oil Refining Processes Co., LTD believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the LD possible manner on a long term and mutually beneficial basis. If you want to know more information about our sunflower oil plant or any other seed processing plant, please contact us in the following form. Our responsible, experienced sunflower oil processing technical team is always ready to serve and guide you at any time.

All the other oil seeds pre-treatment and oil refining equipment, lLD sheller, cleaning sieve, cooker, filter and others is available at Guangxin. If you want to know to start a vegetable oil pressing line with oil press machine, please contact us, we will offer you the LD plan.

Contact:Heidi

Skype:heyabc

Tel:+86 15953125015(also Whatsapp)

Email:[email protected]

Leader Edible Oil Refining Processes Co., LTD is your LD choice!